Our fleet of tracking vehicles offer super smooth, agile filming solutions from the ground up. Whether it’s our BuggyCam, Segway, Vehicle Tracking Mounts or CableCam we can offer a tailored to solution to meet your brief.
The Hydra Alien Car Mounting System was designed from the ground up to work in conjunction with smaller gimbals to allow for a lightweight solution to car-mounted cinematography.
The system utilises a highly customisable combination of dovetail-like plates and suction cups that can support a payload of 50kg each. Highly elastic shock-absorbing silicon provides longer durability and less abrasion, while the updated suction cup plungers create a stronger seal for improved security in colder weather.
When interconnected, the system allows us to fine-tune the exact placement of their shot to achieve almost any angle possible when mounting to a vehicle.
The system also uses a shock absorbing arm to better stabilise the camera for certain shots as well as a spring-loaded cradle head if the intended shot requires that the gimbal be flipped upside down.
The newly included Hydraulic Dampening Pole further stabilises the arm to provide smoother results when driving conditions are less than optimal.
The Hydra Alien supports full wireless control of the Ronin RS2 via the Remote Control Kit which allows us to control and and tilt of the camera head for maximum precision while operating.
High, low. To the side of the car, mounted on top of it — almost any car mounted shot can be configured using the Hydra Alien Car Mounting System. Let your imagination run wild!
The BuggyCam system allows us to film at super low angles for amazing dynamic low camera angle shots and when coupled with our FreeFly Movi Pro with full 3-axis control we’re able to crate shots that are hard to get with traditional filming methods. The Tero’s anti-vibration isolation mount on the buggy allows for smooth stable shots.
Our Buggy Cam is provided with two crew (driver and remote camera operator), Freefly Movi Pro and one of our in-house cameras or you can simply add your own camera to the Movi Gimbal. Our Connex live HD feed is used to get the picture back from the car to the monitor, which can then be fed out to a directors monitor via HD-SDI.
The CableCam is ideally-designed for point to point filming through rough terrains or over crowds, making for a dynamic, clear and smooth filming solution for occasionally unruly environments. Features include the latest in mobile dolly systems, gyro technology, dynema cable and powerful motors.
The camera can travel 0.5mph to 30pm, over 200m of cable. An easy rig system that requires just two sturdy points. Max cable slope 19% grade (11 degrees)
The CableCam system is controlled wirelessly via a joystick controller with a 1km range. The camera is also connected to a wireless video system to send and display the video feed in real time to an LCD at the camera operator station, so you can be sure that you are capturing a perfectly-framed shot.
Ready to roll in a matter of minutes and provides professional, smooth footage at much cheaper rates than track and dolly. Ideal for following presenters, sports personalities and much more. Our operators apply their skill and agility to seamlessly capture your shot.
Our Segway is provided with the Freelfy Movi Pro and one of our in-house cameras or you can simply add your own camera to the Movi Gimbal.
Get your shot now! With our highly versatile filming platforms for indoor and outdoor tracking and point to point filming. Just give us a call on 0208 166 9712 or fill out the contact form below for more information. We have offices in London and Wiltshire, and can operate across the UK and overseas.
ADDRESSSkypower Ltd, 85 Great Portland Street,First Floor, London. W1W 7LT
Phone: 0208 166 9712Areas We Cover